How To Set Ethernet Ip Address Windows 10

There are many reasons why yous might want to set a static IP address for your Windows 10 PC. In most cases, your router will assign your calculator a dynamic IP accost, pregnant it changes from time to time. This can brand information technology hard to access your computer remotely, use certain programs, and let other users on your network send you files. Hither's how to set a static IP address on your Windows ten PC.

Click the magnifying glass icon in the bottom-left corner of your screen.
Then type IP Accost into the search bar and click Open. You tin also hit Enter on your keyboard if you see Ethernet settings.
And then click Change adapter options . Yous will see this under Related settings. This will open up a control panel window.
Side by side, right-click on WiFi or Ethernet . This will depend on what kind of connection you are using. If your computer is hooked up to your router via an Ethernet cable, right-click that option. If your estimator is connected via WiFi, right-click that option. You lot should be able to tell which adapter you are using by looking at the red Xs and dark-green confined.
Then select Status.
Next, click Details.
Then accept note of your IPv4 address, IPv4 subnet mask, IPv4 default gateway, and IPv4 DNS server. It is a good idea to write this data down, as yous volition demand information technology later on.
Then go back to the Network Connections window, right-click your network, and select Properties . Y'all can do this past exiting out of the Network Connection Details and Condition windows by clicking the X in the height-right corner.
Next, select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
Then click the radio button next to Use the following IP address.
Side by side, enter the static IP address, subnet mask, default gateway, and DNS server you desire to use.
- IP Address: Use the first iii segments of your electric current IP address. So, if your estimator's IP address is currently 192.168.0.one, you lot can use any IP address that starts with 192.168.0.X, where Ten is any number between 1 and 254. Or, if your estimator'south IP address is 10.0.0.i, you tin can utilise an IP accost that starts with 10.0.0.10, where 10 is whatsoever number between 1 and 254. Merely make sure y'all don't set your computer's IP address to be the same as your router'due south IP address.
- Subnet Mask: Unremarkably, on a domicile network, the subnet mask is 255.255.255.0.
- Default Gateway: This is your router'southward IP address, or the IP address of any other gateway, such as an admission bespeak
- DNS Server: If you lot see any numbers already filled in this box, y'all can apply those. If not, y'all can use the DNS server numbers yous saw in the Network Connexion Details window. Or y'all tin can use Google's preferred DNS server of 8.eight.8.8 and 8.8.4.four.
Finally, click OK then close the Properties window. Your changes volition non go into effect until you close the WiFi/Ethernet Backdrop window.

Once you ready your Windows ten PC to a static IP address, check out our step-by-stride guide on how to port forward, then you can remotely access your computer from anywhere in the world.

Troubleshooting-Computer1